Fabric materials

Overview

In the fabric materials group, you can apply fabric to the surface.
If you turn on the Use back/Use side option, you can apply different materials to the front, back, and sides.
If the option is turned off, a surface cannot have different materials assigned to each side and will use a front material as common.

 

Location

Surface > Right Panel > Properties > Pattern

 

Operation Method

Use the same material on every side

  1. Select the surface to apply fabric in All/ Surfaces Selection Mode.
  2. Double-click on the fabric to apply via Left Panel > Fabric > My Library.
  3. The applied fabric will appear in both 2D canvas and 3D viewport.

Use the different materials on each side

  1. Select the surface to apply fabric in All/ Surfaces Selection Mode.

  2. Activate the Use back/ Use side option.

  3. Go to Left Panel > Fabric > Front/Back/Side tabs each.

  4. Double-click the fabric on each tab to apply via Left Panel > Fabric > My Library.

  5. The applied fabric will appear in both 2D canvas and 3D viewport.
    You need to turn on the thickness option in the Viewport Toolbar to check the side material.

Comments

0 comments

Please sign in to leave a comment.