Sewing Factor is a function for changing sewing line properties.
Sewing > Right Panel > Properties > Sewing Properties > Sewing Angle
Sewing > Right Panel > Properties > Sewing Properties > Activation Order
Sewing > Right Panel > Properties > Sewing Properties > Temporary
Sewing > Context Menu > Reverse
- Select a sewing in Sewing Selection Mode.
- Adjust the value and options via Sewing> Right Panel> Properties> Sewing Properties.
- Select a sewing to reverse in Sewing Selection Mode.
- Right-click on the selected sewing in order to open the context menu, then select Reverse.
This function is for setting the angle between surfaces connected through sewing.
The basic flat plane is set at 180°. A smaller angle folds the surface inwards; a larger angle folds the surface outwards.
This function is for setting the order of sewing for the simulation.
The larger the value, the later it participates in the simulation. Surfaces cannot be ignored or penetrated according to order unlike Surface Activation Order.
This function is for invalidating sewing lines by disabling the temporary option after draping time.
This function is for reversing the direction of a sewing segment/ group on each side connected by a sewing line.
Please sign in to leave a comment.