Overview
Combine is a function for combining with a single curve to move fluidly.
Location
2D Canvas > Line / Curve > Context Menu > Combine
2D Canvas > Line / Curve > Context Menu > Combine Force
Operation Method
Combine
 Select lines/ curves in All/ Curves Selection Mode.
 Rightclick on the selected line/ curve to open the context menu, then select Combine.
 Set the curve length and curve connection angle in the Combine Conditions dialog box, then click OK.
 The lines/curves will combine naturally with fewer segments than before.
※ Note: Combine is a function that grants certain selected lines/ curves to connect to a single line/ curve.
Combine Force
 Select lines/ curves in All/ Curves Selection Mode.
 Rightclick on the selected line/ curve to open the context menu, then select Combine Force.
 The lines/ curves will combine naturally with fewer segments than before.
Components
Combine
Combine is a function that grants certain selected lines/ curves to connect to a single line/ curve.

Curve Length
Only segments with a length shorter than the value set by the curve length can be used to combine.
Combine maintains shapes better with smaller values and is less effective for shapes with larger values.
Example:
When setting the curve length at 5 cm, the curves shorter than 5cm (0–5 cm) will combine to create curves with segments longer than 5cm (5+ cm).

Curve Connection Angle
The Combine function is only possible when the supplementary angle made between lines/ curves is smaller than the curve connection angle. For example, when the angle between curves is A, the combine function is only possible if the curve connection angle is smaller than 180°A°.
Combine maintains shapes better with smaller values and is less effective for shapes with larger values.
Example:
If the angle making up the two connected curves is 165°, the supplementary angle for this is 15° (180°165°). If the curve connection angle exceeds 15°, the corresponding curve will combine but it cannot be combined if it is less than 15°.
Combine Force
Combine Force is a function that forcefully connects selected lines/ curves to a single line/ curve without any specific conditions.
Comments
0 comments
Please sign in to leave a comment.