Overview

The Active function is to activate or deactivate inner lines/ curves/ surfaces. Convert inner lines/ curves/ surfaces to pattern baselines through the Active button.

Location

2D View > Lines/ Curves/ Surfaces > Context Menu > Active

Operation Method

Activate

1. Select the deactivated lines/ curves/ surfaces in Deactivated Selection Mode.
2. Right-click on the selected lines/ curves/ surfaces to open the context menu, then turn on the Active button.

Deactivate

1. Select the inner lines/ curves/ surfaces in All/ Curves Selection Mode.
2. Right-click on the selected lines/ curves/ surfaces to open the context menu, then turn off the Active button.